Aller au contenu principal
Aide

CyberHome CH-DVD 300 Power Supply Replacement

Tutoriel étudiant recommandé

Tutoriel étudiant recommandé

Ce tutoriel est le résultat du travail hors pair d'un de nos étudiants et notre équipe iFixit le trouve particulièrement réussi.

Replace the power supply supply in the CyberHome CH-DVD 300.

  • Auteur: Chris Menezes
  • Durée estimée : 10 minutes
  • Difficulté: Facile

Replacing the power supply involves unplugging the white connection cord from the power supply board after the top panel is removed.

Étape 1 Power Supply  ¶ 

Orient the device to locate the power supply board on the far right corner. Use needle nose pliers to  pull the white connector from the power supply board. The power supply board is connected directly to the power cord. This is not the same thing as the mother board. The power supply board is connected directly to the power cord. This is not the same thing as the mother board.

Étape 1 Power Supply  ¶ 

  • Orient the device to locate the power supply board on the far right corner. Use needle nose pliers to pull the white connector from the power supply board.

  • The power supply board is connected directly to the power cord. This is not the same thing as the mother board.