Aller au contenu principal
Aide

Sony Cyber-shot DSC-W150 Back Casing Replacement

Police de grammaire

Police de grammaire

Réveillez le prof qui sommeille en vous et aidez-nous à améliorer l'orthographe de ce tutoriel !

Un membre a contribué à ce tutoriel

Un membre a contribué à ce tutoriel

Un membre de notre communauté tout à fait remarquable a réalisé ce tutoriel. Il n'a pas été dirigé par l'équipe iFixit.

  • Auteur: iRobot
  • Durée estimée : 5 minutes
  • Difficulté: Très facile

This repair guide will aid you in the steps to disassemble the Sony Cyber-shot DSC W150 in order to replace a scratched or broken back casing.

Étape 1 Back Casing  ¶ 

The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

Étape 1 Back Casing  ¶ 

  • The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

Étape 2  ¶ 

Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

Étape 2  ¶ 

  • Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

Étape 3  ¶ 

On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

Étape 3  ¶ 

  • On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

Étape 4  ¶ 

On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

Étape 4  ¶ 

  • On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

Étape 5  ¶ 

Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

Étape 5  ¶ 

  • Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

Étape 6  ¶ 

Now, carefully pull off the back cover.

Étape 6  ¶ 

  • Now, carefully pull off the back cover.

Étape 7  ¶ 

The two halves of the camera casing should now be separate.

Étape 7  ¶ 

  • The two halves of the camera casing should now be separate.