Aller au contenu principal
Aide

MacBook Pro 17" Models A1151 A1212 A1229 and A1261 RAM Shield Replacement

  • Auteur: iRobot
  • Difficulté: Facile

Removing a few screws will remove this part and allow access to your RAM.

Étape 1 RAM Shield  ¶ 

Remove the four identical Phillips 3.4 mm screws from the memory door.  These screws have 4 mm diameter heads rather than the 3 mm heads on the body screws.

Étape 1 RAM Shield  ¶ 

  • Remove the four identical Phillips 3.4 mm screws from the memory door. These screws have 4 mm diameter heads rather than the 3 mm heads on the body screws.

Étape 2  ¶ 

Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

Étape 2  ¶ 

  • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.