Aller au contenu principal
Aide

PlayStation 3 Slim Power Supply Replacement

Replace a burned-out power supply on your PlayStation 3 Slim.

  • Auteur: Andrew Bookholt
  • Durée estimée : 30 minutes
  • Difficulté: Modérée

Use this guide to replace your power supply.

Étape 1 Power Supply  ¶ 

Squeeze the AC inlet connector's locking mechanism and pull straight up to disconnect it from the power supply. Squeeze the AC inlet connector's locking mechanism and pull straight up to disconnect it from the power supply.

Étape 1 Power Supply  ¶ 

  • Squeeze the AC inlet connector's locking mechanism and pull straight up to disconnect it from the power supply.

Étape 2  ¶ 

Pull the DC-Out cables straight up to lift their connector up and out of its socket on the power supply.

Étape 2  ¶ 

  • Pull the DC-Out cables straight up to lift their connector up and out of its socket on the power supply.

Étape 3  ¶ 

Remove the two 7.6 mm Phillips screws securing the power supply to the lower case.

Étape 3  ¶ 

  • Remove the two 7.6 mm Phillips screws securing the power supply to the lower case.

Étape 4  ¶ 

Lift the power supply upward from its left edge as viewed from the front of the PS3.

Étape 4  ¶ 

  • Lift the power supply upward from its left edge as viewed from the front of the PS3.

Étape 5  ¶ 

Continue to lift the left edge of the power supply until it lifts off the two metal posts shown in the second picture. Remove the power supply from the PS3, minding any cables that may get caught.

Étape 5  ¶ 

  • Continue to lift the left edge of the power supply until it lifts off the two metal posts shown in the second picture.

  • Remove the power supply from the PS3, minding any cables that may get caught.