Aller au contenu principal
Aide

Nintendo DSi XL Rear Bezel Replacement

Rear bezel replacement.

Be the envy of onlooking gamers with a shiny new rear bezel on your DSi XL.

Étape 1 Rear Bezel  ¶ 

Use a push pin to remove the four plastic screw covers on the front bezel. Use a push pin to remove the four plastic screw covers on the front bezel. Use a push pin to remove the four plastic screw covers on the front bezel.

Étape 1 Rear Bezel  ¶ 

  • Use a push pin to remove the four plastic screw covers on the front bezel.

Étape 2  ¶ 

Remove four Phillips screws securing the front bezel to the rear bezel.

Étape 2  ¶ 

  • Remove four Phillips screws securing the front bezel to the rear bezel.

Étape 3  ¶ 

Using two hands, gently slide the rear bezel upwards. The rear bezel will move only about 2 mm.

Étape 3  ¶ 

  • Using two hands, gently slide the rear bezel upwards.

  • The rear bezel will move only about 2 mm.

Étape 4  ¶ 

Insert a spudger into the gap between the front and rear bezel Rotate the spudger away from the DSi XL, prying the two bezels apart.

Étape 4  ¶ 

  • Insert a spudger into the gap between the front and rear bezel

  • Rotate the spudger away from the DSi XL, prying the two bezels apart.

Étape 5  ¶ 

In the same manner as described above, continue prying along the top edge of the front and rear bezels.

Étape 5  ¶ 

  • In the same manner as described above, continue prying along the top edge of the front and rear bezels.

Étape 6  ¶ 

Separate the rear bezel from the front bezel.

Étape 6  ¶ 

  • Separate the rear bezel from the front bezel.

  • Do not attempt to completely remove the rear bezel yet. It is still attached to the front bezel by the rear-facing camera.

Étape 7  ¶ 

Use the flat end of a spudger to pry the rear camera off the rear bezel.

Étape 7  ¶ 

  • Use the flat end of a spudger to pry the rear camera off the rear bezel.

  • Remove the rear bezel.