Aller au contenu principal
Aide

Nintendo DSi XL Upper Screen Replacement

Replacing DSi XL Upper Screen

Get a better view of whats going on in your games by replacing a scratched upper screen. This is not the touchscreen.

Étape 1 Upper Screen  ¶ 

Using the flat end of a spudger, pry the Wi-Fi antenna out of its housing from within the front bezel and move it aside.

Étape 1 Upper Screen  ¶ 

  • Using the flat end of a spudger, pry the Wi-Fi antenna out of its housing from within the front bezel and move it aside.

Étape 2  ¶ 

Using the flat end of a spudger, pry the left speaker out of its socket on the front bezel. De-route the speaker cable along the top edge of the screen. Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.

Étape 2  ¶ 

  • Using the flat end of a spudger, pry the left speaker out of its socket on the front bezel.

  • De-route the speaker cable along the top edge of the screen.

  • Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard.

  • In the same manner as described above, remove the right speaker from its socket on the front bezel.

  • Place both speakers on the back of the upper LCD.

Étape 3  ¶ 

Open the DSi XL.

Étape 3  ¶ 

  • Open the DSi XL.

  • Carefully push the upper display assembly through its housing in the front bezel.

  • The upper display assembly is held in place via adhesive to the front bezel. Push firmly, being careful not to break the upper LCD.

  • Rotate the upper display assembly out of the front bezel.

Étape 4  ¶ 

Insert the flat end of a spudger underneath the adhesive strip that secures the front screen to the upper LCD. Slide the spudger along the bottom side of the upper LCD, freeing the adhesive along that edge.

Étape 4  ¶ 

  • Insert the flat end of a spudger underneath the adhesive strip that secures the front screen to the upper LCD.

  • Slide the spudger along the bottom side of the upper LCD, freeing the adhesive along that edge.

Étape 5  ¶ 

In the same manner as previously described, detach the adhesive along the left edge of the upper LCD. In the same manner as previously described, detach the adhesive along the left edge of the upper LCD.

Étape 5  ¶ 

  • In the same manner as previously described, detach the adhesive along the left edge of the upper LCD.

Étape 6  ¶ 

In the same manner as previously described, detach the adhesive along the right side of the upper LCD. In the same manner as previously described, detach the adhesive along the right side of the upper LCD.

Étape 6  ¶ 

  • In the same manner as previously described, detach the adhesive along the right side of the upper LCD.

Étape 7  ¶ 

Carefully lift the upper screen from the bottom edge. Pull the upper screen away from the upper LCD.

Étape 7  ¶ 

  • Carefully lift the upper screen from the bottom edge.

  • Pull the upper screen away from the upper LCD.