Aller au contenu principal
Aide

Sony Cyber-shot DSC-W290 LCD Assembly Replacement

Police de grammaire

Police de grammaire

Réveillez le prof qui sommeille en vous et aidez-nous à améliorer l'orthographe de ce tutoriel !

Photos d’action

Photos d’action

Montrez ce dont un héros est capable ! Ce tutoriel a besoin d'images pour mieux illustrer certaines opérations spécifiques.

This guide is shows you how to replace the Sony Cyber-shot DSC-W290's LCD screen.

  • Auteur: Evan Mayer
  • Durée estimée : 20 minutes
  • Difficulté: Modérée

This guide will teach you how to replace the Sony Cyber-shot DSC-W290's LCD screen.

Étape 1 LCD Assembly  ¶ 

Gently pull the LCD and its casing away from the motherboard as shown.

Étape 1 LCD Assembly  ¶ 

  • Gently pull the LCD and its casing away from the motherboard as shown.

  • Be careful not to rip out any ribbon cables.

Étape 2  ¶ 

Disconnect the small ribbon-wire by gently pulling on the small ribbon-wire where it connects with the motherboard. Do not use excessive force to remove the wire because this may cause it to tear.

Étape 2  ¶ 

  • Disconnect the small ribbon-wire by gently pulling on the small ribbon-wire where it connects with the motherboard.

  • Do not use excessive force to remove the wire because this may cause it to tear.

Étape 3  ¶ 

Disconnect the large ribbon-wire by pulling on the large ribbon-wire where it connects to the motherboard. Disconnect the large ribbon-wire by pulling on the large ribbon-wire where it connects to the motherboard.

Étape 3  ¶ 

  • Disconnect the large ribbon-wire by pulling on the large ribbon-wire where it connects to the motherboard.

Étape 4  ¶ 

Pull the LCD and its casing away from the rest of the camera.

Étape 4  ¶ 

  • Pull the LCD and its casing away from the rest of the camera.