Aller au contenu principal
Aide

Sony Cyber-shot DSC-W55 Back Case Replacement

Disassembling the back cover of the camera so that we can repair components from the inside.

  • Auteur: kkfong91
  • Durée estimée : 5 minutes
  • Difficulté: Facile

Disassembling the back cover of the camera so that we can repair components from the inside.

Étape 1 Back Case  ¶ 

Using the Phillips #00 Screwdriver, remove the two screws from the caution panel. Remove that panel.

Étape 1 Back Case  ¶ 

  • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

  • Remove that panel.

  • Careful for falling pieces.

Étape 2  ¶ 

Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel). Remove that panel.

Étape 2  ¶ 

  • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

  • Remove that panel.

Étape 3  ¶ 

Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

Étape 3  ¶ 

  • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

Étape 4  ¶ 

Gently remove the back cover. It may be a bit stiff, so use some force to remove it. Proceed with caution.

Étape 4  ¶ 

  • Gently remove the back cover.

  • It may be a bit stiff, so use some force to remove it. Proceed with caution.