Aller au contenu principal
Aide

Panasonic Lumix DMC-FX01 Front Casing Replacement

Restore the front of your camera to its former glory.

  • Auteur: Andrew
  • Durée estimée : 30 - 45 minutes
  • Difficulté: Difficile

Use this guide to replace the front casing of your Panasonic Lumix DMC-FX01.

Sections
Outils

Étape 1 Front Casing  ¶ 

Remove the two black 5.35 mm screws that hold in the front faceplate. There may be a third screw the the right of the lens assembly.

Étape 1 Front Casing  ¶ 

  • Remove the two black 5.35 mm screws that hold in the front faceplate.

  • There may be a third screw the the right of the lens assembly.

Étape 2  ¶ 

Carefully remove the upper assembly, which houses the buttons and the flash battery. Carefully remove the upper assembly, which houses the buttons and the flash battery. Carefully remove the upper assembly, which houses the buttons and the flash battery.

Étape 2  ¶ 

  • Carefully remove the upper assembly, which houses the buttons and the flash battery.

Étape 3  ¶ 

Carefully remove the front casing after verifying that the thin plastic around the lens is not still attached.

Étape 3  ¶ 

  • Carefully remove the front casing after verifying that the thin plastic around the lens is not still attached.