Aller au contenu principal
Aide

Super Nintendo Motherboard Replacement

Replace a faulty motherboard

  • Auteur: Melina
  • Durée estimée : 15 - 30 minutes
  • Difficulté: Modérée
Sections

Étape 1 Motherboard  ¶ 

Remove the two Phillips two 11.6mm screws that connect the front shield to the motherboard.

Étape 1 Motherboard  ¶ 

  • Remove the two Phillips two 11.6mm screws that connect the front shield to the motherboard.

Étape 2  ¶ 

Lift the front shield straight up to remove it from the motherboard.

Étape 2  ¶ 

  • Lift the front shield straight up to remove it from the motherboard.

Étape 3  ¶ 

Remove the two silver 15.6 mm Phillips #2 screws on either side of the 62 pin connector.

Étape 3  ¶ 

  • Remove the two silver 15.6 mm Phillips #2 screws on either side of the 62 pin connector.

Étape 4  ¶ 

Remove the  11.8 mm Phillips #2 screw near the rear of the SNES.

Étape 4  ¶ 

  • Remove the 11.8 mm Phillips #2 screw near the rear of the SNES.

Étape 5  ¶ 

Lift the motherboard straight up to remove it.

Étape 5  ¶ 

  • Lift the motherboard straight up to remove it.