Aller au contenu principal
Aide

Disassembling IBM WorkPad c3 LCD

Texte bizarre

Texte bizarre

Certaines parties de ce texte sont confuses, répétitives ou hors-sujet. Modifie-les pour les rendre plus claires !

This guide will show how to remove the LCD/Digitizer combo from the IBM WorkPad c3.

This is a step-by-step guide showing how to remove the LCD/Digitizer combo from the IBM WorkPad c3. This is a fairly easy removal.

Sections
Outils

Étape 1 LCD  ¶ 

Using the spudger lift the tabs  holding the LCD/Digitizer combo cables to the WorkPad. Using the spudger lift the tabs  holding the LCD/Digitizer combo cables to the WorkPad.

Étape 1 LCD  ¶ 

  • Using the spudger lift the tabs holding the LCD/Digitizer combo cables to the WorkPad.

Étape 2  ¶ 

Using your thumb, press down gently on the back of the LCD. The LCD will disconnect and fall out of the case, so be sure to have your hand waiting for it.

Étape 2  ¶ 

  • Using your thumb, press down gently on the back of the LCD.

  • The LCD will disconnect and fall out of the case, so be sure to have your hand waiting for it.