Aller au contenu principal
Aide

Disassembling Skil 88 Front Housing

Open the front housing to access the major parts of the drill.

  • Auteur: Matt
  • Durée estimée : 1 - 2 minutes
  • Difficulté: Facile

The front housing includes the motor, the chuck, and the gears. There's a good chance that whatever needs to be replaced will be found in here.

Étape 1 Disassembling Skil 88 Front Housing  ¶ 

On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

Étape 1 Disassembling Skil 88 Front Housing  ¶ 

  • On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

Étape 2  ¶ 

Pull the front housing apart from the rear. The motor and gears might fall out when you are pulling it apart.

Étape 2  ¶ 

  • Pull the front housing apart from the rear.

  • The motor and gears might fall out when you are pulling it apart.