Aller au contenu principal
Aide

HP Mini 1000 USB & Power Board Replacement

Tutoriel vedette

Tutoriel vedette

L'équipe iFixit trouve ce tutoriel particulièrement réussi.

Replace the USB and Power board in your HP Mini 1000.

Replace the USB and Power board in your HP Mini 1000.

Sections

Étape 1 USB & Power Board  ¶ 

Use your fingernail or the flat end of a spudger to flip up the retaining flap on the SIM card cable ZIF socket. Be sure you are prying up on the retaining flap, not the socket itself.

Étape 1 USB & Power Board  ¶ 

  • Use your fingernail or the flat end of a spudger to flip up the retaining flap on the SIM card cable ZIF socket.

  • Be sure you are prying up on the retaining flap, not the socket itself.

  • Pull the SIM card ribbon cable out of its socket.

Étape 2  ¶ 

Use the flat end of a spudger to gently push the power cable from its socket. Be sure you are pushing on the cable, not the socket itself.

Étape 2  ¶ 

  • Use the flat end of a spudger to gently push the power cable from its socket.

  • Be sure you are pushing on the cable, not the socket itself.

  • It is recommended to push the connector from both sides in a side-by-side rocking motion to dislodge it from its socket.

  • Pull the power ribbon cable out of its socket.

Étape 3  ¶ 

USB and power board remains.

Étape 3  ¶ 

  • USB and power board remains.