Aller au contenu principal
Aide

Samsung Galaxy S6 Home Button Replacement

Replace the home button on a Samsung Galaxy S6.

Follow this guide to replace the home button on a Samsung Galaxy S6.

This guide involves removing the rear glass. Removing the rear glass destroys the adhesive holding it in place. Follow this guide to reinstall the rear glass.

Étape 1 Home Button  ¶ 

Orient the display frame so the home button connector faces you. Use the pointed edge of the spudger to separate the home button ribbon cable from the display frame. Be careful when removing the home button ribbon cable. It is delicate and can tear easily.

Étape 1 Home Button  ¶ 

  • Orient the display frame so the home button connector faces you.

  • Use the pointed edge of the spudger to separate the home button ribbon cable from the display frame.

  • Be careful when removing the home button ribbon cable. It is delicate and can tear easily.

Étape 2  ¶ 

Use the pointed end of a spudger to push the home button cable through the display frame. Use the pointed end of a spudger to push the home button cable through the display frame.

Étape 2  ¶ 

  • Use the pointed end of a spudger to push the home button cable through the display frame.

Étape 3  ¶ 

Flip the display frame over and use the pointed end of a spudger to pull the home button cable completely through the hole. Flip the display frame over and use the pointed end of a spudger to pull the home button cable completely through the hole. Flip the display frame over and use the pointed end of a spudger to pull the home button cable completely through the hole.

Étape 3  ¶ 

  • Flip the display frame over and use the pointed end of a spudger to pull the home button cable completely through the hole.

Étape 4  ¶ 

Slide the spudger under the cable to continue separating it from the frame. Slide the spudger under the cable to continue separating it from the frame. Slide the spudger under the cable to continue separating it from the frame.

Étape 4  ¶ 

  • Slide the spudger under the cable to continue separating it from the frame.

Étape 5  ¶ 

The button is held in place by a tab on each side. To remove the button, it needs to move far enough over to clear the edge of the bracket. Once the cable is entirely separated from the frame, use a spudger to push the home button to the far left of its bracket. Use a spudger to push the home button up and out of its bracket.

Étape 5  ¶ 

  • The button is held in place by a tab on each side. To remove the button, it needs to move far enough over to clear the edge of the bracket.

  • Once the cable is entirely separated from the frame, use a spudger to push the home button to the far left of its bracket.

  • Use a spudger to push the home button up and out of its bracket.

Étape 6  ¶ 

Remove the home button.

Étape 6  ¶ 

  • Remove the home button.