Aller au contenu principal
Aide

Technique: How to Fujifilm Endeavor 100ix

Tutoriel vedette

Tutoriel vedette

L'équipe iFixit trouve ce tutoriel particulièrement réussi.

This guide provides instructions for repairing the CHP Mode Switch on the Fujifilm Endeavor 100ix.

  • Auteur: Eric Nicolai
  • Durée estimée : 15 - 20 minutes
  • Difficulté: Facile

The following guide will help you to fix the CHP Mode Switch by taking off the back cover and cleaning around the switch.

Étape 1 How to Fujifilm Endeavor 100ix  ¶ 

Locate the CHP Mode Switch.

Étape 1 How to Fujifilm Endeavor 100ix  ¶ 

  • Locate the CHP Mode Switch.

Étape 2  ¶ 

Remove any visible debris that may be blocking the CHP Mode Switch.

Étape 2  ¶ 

  • Remove any visible debris that may be blocking the CHP Mode Switch.

  • Using the Q-tip gently wipe away any dust, dirt or residue, in and around the switch.

  • Once you are sure the switch is clean, test it gently by sliding it back and forth between the 'C', the 'H', and the 'P'. If the switch is clean there should be very little resistance and the switch should glide smoothly from one mode to the next.