Aller au contenu principal
Aide

Canon PowerShot A200 Batteries Replacement

How to replace Canon PowerShot A200 batteries.

  • Auteur: Ellen Chambers
  • Durée estimée : 5 minutes
  • Difficulté: Très facile

Take out old, dead batteries. Then replace them with new ones.

Étape 1 Outer Battery Cover  ¶ 

Place the camera so the battery cover is facing up, as shown in the picture. Gently push on the outer battery cover until you hear a click, and then release.

Étape 1 Outer Battery Cover  ¶ 

  • Place the camera so the battery cover is facing up, as shown in the picture.

  • Gently push on the outer battery cover until you hear a click, and then release.

Étape 2 Inner Battery Cover  ¶ 

To open the inner battery cover, push down on the grey latch until you hear a click, and then release. Remove the dead batteries from the camera.

Étape 2 Inner Battery Cover  ¶ 

  • To open the inner battery cover, push down on the grey latch until you hear a click, and then release.

  • Remove the dead batteries from the camera.

Étape 3 Replacing the Batteries  ¶ 

After removing the batteries, insert the new batteries in the proper direction.

Étape 3 Replacing the Batteries  ¶ 

  • After removing the batteries, insert the new batteries in the proper direction.

  • Now push the black, inner cover down until you hear a click to secure the batteries in place.

  • Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.