Aller au contenu principal
Aide

Sony Handycam DCR-DVD103 Lens Replacement

Police de grammaire

Police de grammaire

Réveillez le prof qui sommeille en vous et aidez-nous à améliorer l'orthographe de ce tutoriel !

Texte bizarre

Texte bizarre

Certaines parties de ce texte sont confuses, répétitives ou hors-sujet. Modifie-les pour les rendre plus claires !

A besoin de meilleures images

A besoin de meilleures images

De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!

Meilleure introduction

Meilleure introduction

Améliorez ce tutoriel en complétant ou modifiant l'introduction.

This guide is for the Sony Handycam DCR DVD103 lens in order to remove and replace any broken or malfunctioning parts.

  • Auteur: kaitlin
  • Difficulté: Modérée
Sections
Outils

Étape 1 Lens  ¶ 

Remove (1) 4.5mm thread connecting the lens to body of the camera.

Étape 1 Lens  ¶ 

  • Remove (1) 4.5mm thread connecting the lens to body of the camera.

Étape 2  ¶ 

Remove the (2) 4.5mm screws from the bottom left and the top left of the lens casing that is holding the lens in place. The screws are marked with blue circles in the slide. Remove the (2) 2.9mm screws from the top and bottom of the right side of lens casing. These screws are marked with red circles in the slide.

Étape 2  ¶ 

  • Remove the (2) 4.5mm screws from the bottom left and the top left of the lens casing that is holding the lens in place. The screws are marked with blue circles in the slide.

  • Remove the (2) 2.9mm screws from the top and bottom of the right side of lens casing. These screws are marked with red circles in the slide.

Étape 3  ¶ 

Remove the copper strips from their inserts by sliding them out gently. If too much force is used they might tear.

Étape 3  ¶ 

  • Remove the copper strips from their inserts by sliding them out gently. If too much force is used they might tear.

Étape 4  ¶ 

Remove (1) 4.5mm screw that connects the body of the camera to the lens.  It is located on the DVD side of the camera.

Étape 4  ¶ 

  • Remove (1) 4.5mm screw that connects the body of the camera to the lens. It is located on the DVD side of the camera.

Étape 5  ¶ 

Remove the circuit board by removing (5) 2.9mm screws.  The screws are marked with red circles. Remove the five copper wires attached to it.  The wires are marked with yellow boxes in the slide. Remove the five copper wires attached to it.  The wires are marked with yellow boxes in the slide.

Étape 5  ¶ 

  • Remove the circuit board by removing (5) 2.9mm screws. The screws are marked with red circles.

  • Remove the five copper wires attached to it. The wires are marked with yellow boxes in the slide.

Étape 6  ¶ 

Remove the metal bracket surrounding the lens by unscrewing the (3) 2.9mm black screws. Remove the metal bracket surrounding the lens by unscrewing the (3) 2.9mm black screws.

Étape 6  ¶ 

  • Remove the metal bracket surrounding the lens by unscrewing the (3) 2.9mm black screws.

Étape 7  ¶ 

Unscrew the (2) silver, 4.5mm screws that are located at the opposite end of the lens. Caution: After the screws are removed you are left with just the lens. Be careful because there is a small piece of glass that may fall out.

Étape 7  ¶ 

  • Unscrew the (2) silver, 4.5mm screws that are located at the opposite end of the lens.

  • Caution: After the screws are removed you are left with just the lens. Be careful because there is a small piece of glass that may fall out.