Aller au contenu principal
Aide

Nikon Coolpix P4 Motherboard Replacement

Puces !

Puces !

Une bonne utilisation des balises, de la couleur et/ou du format des puces donnera de la clarté à ce tutoriel !

Problème de balisage

Problème de balisage

Ce tutoriel nécessite de meilleures balises. Améliorez-le par des corrections ou des annotations de balisage.

Replacing the Motherboard.

  • Auteur: Luke Baumann
  • Durée estimée : 10 minutes
  • Difficulté: Modérée

This guide will tell you how to replace your motherboard

Étape 1 Motherboard  ¶ 

Remove the screw to the right of the flash.

Étape 1 Motherboard  ¶ 

  • Remove the screw to the right of the flash.

  • Remove the screw to the right of the microphone on the bottom. (0.124in)

Étape 2  ¶ 

Remove the two screws on the right side of the camera. (0.115 in screws)

Étape 2  ¶ 

  • Remove the two screws on the right side of the camera. (0.115 in screws)

Étape 3  ¶ 

Remove the four bottom screws. (0.116(fat head)-center screw, 0.112(skinny head)-other screws)

Étape 3  ¶ 

  • Remove the four bottom screws. (0.116(fat head)-center screw, 0.112(skinny head)-other screws)

Étape 4  ¶ 

Remove the 7 screws from the back of the camera. (0.111 in screws)

Étape 4  ¶ 

  • Remove the 7 screws from the back of the camera. (0.111 in screws)

Étape 5  ¶ 

Remove the plug that connects the lens to the left side of the motherboard by firmly grasping the base of the plug and pulling gently sideways away from the camera.

Étape 5  ¶ 

  • Remove the plug that connects the lens to the left side of the motherboard by firmly grasping the base of the plug and pulling gently sideways away from the camera.

Étape 6  ¶ 

Remove the right panel.

Étape 6  ¶ 

  • Remove the right panel.

Étape 7  ¶ 

Remove the screw from the top of the camera. (0.112 in screws)

Étape 7  ¶ 

  • Remove the screw from the top of the camera. (0.112 in screws)

Étape 8  ¶ 

Remove the three screws from the motherboard. (0.112 in screws)

Étape 8  ¶ 

  • Remove the three screws from the motherboard. (0.112 in screws)

  • Detach the orange tab with the foam on top. It will click out of place.

Étape 9  ¶ 

Remove the motherboard by pulling it up, out of the port.

Étape 9  ¶ 

  • Remove the motherboard by pulling it up, out of the port.

Étape 10  ¶ 

Carefully remove the tab that connects the flash to the motherboard from the port by gently pulling connector to the right, out of its port.

Étape 10  ¶ 

  • Carefully remove the tab that connects the flash to the motherboard from the port by gently pulling connector to the right, out of its port.

  • Be careful when removing the connector.

Étape 11  ¶ 

Remove the motherboard from camera body.

Étape 11  ¶ 

  • Remove the motherboard from camera body.

  • Replace with a new motherboard and follow the steps in reverse order to reassemble.