Aller au contenu principal
Aide

Samsung Jack Rear Case Replacement

Replace the Samsung Jack's rear case.

  • Auteur: Paul Piller
  • Durée estimée : 5 minutes
  • Difficulté: Modérée

Use this guide to install a rear case.

Étape 1 Rear Case  ¶ 

Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.

Étape 1 Rear Case  ¶ 

  • Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.

Étape 2  ¶ 

The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force. Insert the Plastic Opening Tool in between the front and rear cases. Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.

Étape 2  ¶ 

  • The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.

  • Insert the Plastic Opening Tool in between the front and rear cases.

  • Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.

Étape 3  ¶ 

Lift the rear case off of the phone.

Étape 3  ¶ 

  • Lift the rear case off of the phone.