Aller au contenu principal
Aide

Nintendo 3DS SD Board Replacement

SD board replacement.

  • Auteur: David Hodson
  • Durée estimée : 10 - 20 minutes
  • Difficulté: Modérée

Replacing the SD board in your 3DS may help resolve issues you're having loading and saving content.

Sections

Étape 1 SD Board  ¶ 

Remove the two 4.5 mm Phillips screws securing the SD board to the motherboard.

Étape 1 SD Board  ¶ 

  • Remove the two 4.5 mm Phillips screws securing the SD board to the motherboard.

Étape 2  ¶ 

The connector for the SD board sits underneath the Circle Pad ribbon cable. Use the flat end of a spudger to pry the SD board ribbon cable connector off its socket on the motherboard.

Étape 2  ¶ 

  • The connector for the SD board sits underneath the Circle Pad ribbon cable.

  • Use the flat end of a spudger to pry the SD board ribbon cable connector off its socket on the motherboard.

Étape 3  ¶ 

Insert the flat end of a spudger between the SD board and the motherboard. Run the spudger along the sides of the SD board to free it from the adhesive pad holding it in place. Once completely freed, lift the SD board straight off the motherboard.

Étape 3  ¶ 

  • Insert the flat end of a spudger between the SD board and the motherboard.

  • Run the spudger along the sides of the SD board to free it from the adhesive pad holding it in place.

  • Once completely freed, lift the SD board straight off the motherboard.