Aller au contenu principal
Aide

Nintendo 3DS Circle Pad Replacement

Nintendo 3DS Circle Pad replacement.

  • Auteur: David Hodson
  • Durée estimée : 1 - 2 heures
  • Difficulté: Difficile

Figure out a way to break your Circle Pad? Luckily, you can replace it with a new one.

Sections

Étape 1 Circle Pad  ¶ 

There is a black plastic ring that sits between the bottom of the circle pad and the underside of the upper case. The ring has a slit in it that allows you to remove and reinstall it.

Étape 1 Circle Pad  ¶ 

  • There is a black plastic ring that sits between the bottom of the circle pad and the underside of the upper case. The ring has a slit in it that allows you to remove and reinstall it.

  • Use a spudger to orient the Circle Pad and plastic ring so that the slit in the ring is 180o from the opening in the bottom of the Circle Pad.

Étape 2  ¶ 

Insert the tip of a spudger into the slot in the bottom of the Circle Pad and under the plastic ring. Use a prying motion to remove the plastic ring from underneath the bottom of the Circle Pad.

Étape 2  ¶ 

  • Insert the tip of a spudger into the slot in the bottom of the Circle Pad and under the plastic ring.

  • Use a prying motion to remove the plastic ring from underneath the bottom of the Circle Pad.

  • It is all right if the ring is slightly bent by the spudger during removal. As long as it is not torn, the ring will still perform its intended duty.

Étape 3  ¶ 

Open the 3DS and hold it so that the bottom of the buttons are facing upward. Grab the top of the Circle Pad and pull the tip of one of the "prongs" on the bottom of the Circle pad through the hole in the upper case. Continue pulling the bottom of the Circle Pad through the hole in the upper case while rotating the Circle Pad until it is free.

Étape 3  ¶ 

  • Open the 3DS and hold it so that the bottom of the buttons are facing upward.

  • Grab the top of the Circle Pad and pull the tip of one of the "prongs" on the bottom of the Circle pad through the hole in the upper case.

  • Continue pulling the bottom of the Circle Pad through the hole in the upper case while rotating the Circle Pad until it is free.