Aller au contenu principal
Aide

HP Photosmart c3180 Encoder Strip Replacement

Problème de balisage

Problème de balisage

Ce tutoriel nécessite de meilleures balises. Améliorez-le par des corrections ou des annotations de balisage.

Remove a faulty encoding strip.

  • Auteur: Jim
  • Durée estimée : 15 - 20 minutes
  • Difficulté: Difficile

Étape 1 Encoder Strip  ¶ 

Set aside the printer body Unhook the encoding strip by pinching it on the right side and pulling away from the center of the ink cartridge track. Unhook the encoding strip by pinching it on the right side and pulling away from the center of the ink cartridge track.

Étape 1 Encoder Strip  ¶ 

  • Set aside the printer body

  • Unhook the encoding strip by pinching it on the right side and pulling away from the center of the ink cartridge track.

Étape 2  ¶ 

Rotate the Track 180 degrees and slide the printer carriage slightly to the left. Grasp the metal tab holding the encoding strip and pull it away from the track while pulling it up.

Étape 2  ¶ 

  • Rotate the Track 180 degrees and slide the printer carriage slightly to the left.

  • Grasp the metal tab holding the encoding strip and pull it away from the track while pulling it up.

  • Without releasing the metal tab, pull the encoding strip through the ink cartridge carriage. The encoding strip should slide out smoothly.