Aller au contenu principal
Aide

Motorola RIZR Z3 Screen Replacement

How to replace the Motorola RIZR Z3 screen.

  • Auteur: Brooke Shuford
  • Durée estimée : 40 minutes
  • Difficulté: Modérée

Guide to installing a new screen.

Sections

Étape 1 Screen  ¶ 

Turn the phone to the front.

Étape 1 Screen  ¶ 

  • Turn the phone to the front.

  • Push the keypad out through the plastic casing.

Étape 2  ¶ 

Turn the phone to the side.

Étape 2  ¶ 

  • Turn the phone to the side.

  • Thread the hinges of the slider through their holes in the casing and pull the slider down and away from the casing.

Étape 3  ¶ 

Use a T4 screwdriver to unscrew the two .15 inch screws holding the LCD to the faceplate.

Étape 3  ¶ 

  • Use a T4 screwdriver to unscrew the two .15 inch screws holding the LCD to the faceplate.

Étape 4  ¶ 

Use a spudger to pry the plastic screen casing partially up from the LCD unit. Use the spudger to pry the ribbon cable away from its clip on the LCD unit. Caution: If the LCD will not function properly if this ribbon cable is broken.

Étape 4  ¶ 

  • Use a spudger to pry the plastic screen casing partially up from the LCD unit.

  • Use the spudger to pry the ribbon cable away from its clip on the LCD unit.

  • Caution: If the LCD will not function properly if this ribbon cable is broken.

  • Pull the plastic screen casing directly away from the LCD unit.

Étape 5  ¶ 

Turn the plastic screen casing over.

Étape 5  ¶ 

  • Turn the plastic screen casing over.

  • Carefully use a spudger to push the on the two clips holding the navigational pad in place.

  • You may have to pry the pad away from the plastic screen casing with the spudger.

Étape 6  ¶ 

Use a plastic opening tool to pry the screen up, being mindful of the glue holding the screen to its casing. Pull the screen directly away from the casing.

Étape 6  ¶ 

  • Use a plastic opening tool to pry the screen up, being mindful of the glue holding the screen to its casing.

  • Pull the screen directly away from the casing.