Aller au contenu principal
Aide

Dell Dimension 4600 Sound Card Replacement

A besoin de meilleures images

A besoin de meilleures images

De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!

How to correctly repair the Sound Card in the Dell Dimension 4600.

  • Auteur: Arvind
  • Durée estimée : 5 - 10 minutes
  • Difficulté: Facile

Use this guide to replace the sound card in your computer.

Sections
Outils

Étape 1 Sound Card  ¶ 

Lay the computer flat on its side so that you are looking down on all of the components.

Étape 1 Sound Card  ¶ 

  • Lay the computer flat on its side so that you are looking down on all of the components.

  • Very important at this point you connect your antistatic wrist strap to the chassis because the computer is no longer connected to ground at the power source. There is potential for static discharge which could destroy components.

Étape 2  ¶ 

Locate the Sound Card and the screw attached to the Sound Card as shown in the picture.

Étape 2  ¶ 

  • Locate the Sound Card and the screw attached to the Sound Card as shown in the picture.

Étape 3  ¶ 

Remove the 8.9 mm screw by using a Phillips #2 screw-driver.

Étape 3  ¶ 

  • Remove the 8.9 mm screw by using a Phillips #2 screw-driver.

Étape 4  ¶ 

Locate and remove the white connector on the sound card by pulling on the black cable. Locate and remove the white connector on the sound card by pulling on the black cable. Locate and remove the white connector on the sound card by pulling on the black cable.

Étape 4  ¶ 

  • Locate and remove the white connector on the sound card by pulling on the black cable.

Étape 5  ¶ 

Grasp the Sound Card and pull it up and out of it's slot. Grasp the Sound Card and pull it up and out of it's slot.

Étape 5  ¶ 

  • Grasp the Sound Card and pull it up and out of it's slot.