Aller au contenu principal
Aide

Microtek ScanMaker 5900 New Locking Mechanism Replacement

A besoin de meilleures images

A besoin de meilleures images

De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!

Problème de balisage

Problème de balisage

Ce tutoriel nécessite de meilleures balises. Améliorez-le par des corrections ou des annotations de balisage.

This guide shows you how to replace the locking mechanism for the scanner.

  • Auteur: Taylor Nesheim
  • Durée estimée : 5 - 10 minutes
  • Difficulté: Modérée

This guide shows the owner of the device how to take and replace the locking mechanism for the scanner.

Étape 1 Remove locking mechanism  ¶ 

Locate the locking mechanism in the front left hand corner of the device. Gently push on it until it becomes loose. Rotate and jiggle it until it comes out the bottom of the scanner.

Étape 1 Remove locking mechanism  ¶ 

  • Locate the locking mechanism in the front left hand corner of the device.

  • Gently push on it until it becomes loose.

  • Rotate and jiggle it until it comes out the bottom of the scanner.

  • Find a replacement locking mechanism and insert it into the scanner.