Aller au contenu principal
Aide

Motorola Defy Teardown

Vue éclatée

Vue éclatée

Les vues éclatées n'offrent qu'une vue de l'intérieur d'un device. Elles ne doivent pas être utilisées comme instructions de démontage.

Un membre a contribué à ce tutoriel

Un membre a contribué à ce tutoriel

Un membre de notre communauté tout à fait remarquable a réalisé ce tutoriel. Il n'a pas été dirigé par l'équipe iFixit.

This disassembly will show you how to remove the logic board as well as the lcd.

Étape 1 Motorola Defy Teardown  ¶ 

Power down the phone

Étape 1 Motorola Defy Teardown  ¶ 

  • Power down the phone

Étape 2  ¶ 

On the back there is a slider that locks the back cover on slide this over to unlock it. On the back there is a slider that locks the back cover on slide this over to unlock it.

Étape 2  ¶ 

  • On the back there is a slider that locks the back cover on slide this over to unlock it.

Étape 3  ¶ 

Remove the battery and sim card as well as the micro sd if one.

Étape 3  ¶ 

  • Remove the battery and sim card as well as the micro sd if one.

Étape 4  ¶ 

Remove the two torx screws in each corner.

Étape 4  ¶ 

  • Remove the two torx screws in each corner.

Étape 5  ¶ 

Remove the 3 torx screws on both sides. Now remove one more torx screw on the bottom.

Étape 5  ¶ 

  • Remove the 3 torx screws on both sides.

  • Now remove one more torx screw on the bottom.

Étape 6  ¶ 

Use the pry tool and insert in between the black and white plastic. Slide across all sides to unlock the clips holding it together.

Étape 6  ¶ 

  • Use the pry tool and insert in between the black and white plastic. Slide across all sides to unlock the clips holding it together.

Étape 7  ¶ 

Remove the the back case (white section) revealing the logic board. Remove the the back case (white section) revealing the logic board. Remove the the back case (white section) revealing the logic board.

Étape 7  ¶ 

  • Remove the the back case (white section) revealing the logic board.

Étape 8  ¶ 

Use the pry tool and detach the digitizer cable and LCD cable from the board. Use the pry tool and detach the digitizer cable and LCD cable from the board. Use the pry tool and detach the digitizer cable and LCD cable from the board.

Étape 8  ¶ 

  • Use the pry tool and detach the digitizer cable and LCD cable from the board.

Étape 9  ¶ 

Lift the logic board out of the phone revealing the LCD.

Étape 9  ¶ 

  • Lift the logic board out of the phone revealing the LCD.

Étape 10  ¶ 

Use pry tool to gently lift the LCD out of the phone revealing the digitizer.

Étape 10  ¶ 

  • Use pry tool to gently lift the LCD out of the phone revealing the digitizer.

Étape 11  ¶ 

Now all that is left is the digitizer frame holding the digitizer.

Étape 11  ¶ 

  • Now all that is left is the digitizer frame holding the digitizer.

  • To remove a broken digitizer heat the front edges of this frame to soften the digitizer adhesive and pry away from the frame.

Étape 12  ¶ 

Thats it now just follow these steps in reverse to put your phone back together.

Étape 12  ¶ 

  • Thats it now just follow these steps in reverse to put your phone back together.