Aller au contenu principal
Aide

Blackberry Bold 9000 Volume Toggle Replacement

This guide will show you how to replace your volume toggle so you never miss important calls again.

  • Auteur: Kelly
  • Durée estimée : 10 - 15 minutes
  • Difficulté: Modérée
Sections

Étape 1 Volume Toggle  ¶ 

Lift out the motherboard assembly using the plastic opening tool, prying at all four sides of the device.

Étape 1 Volume Toggle  ¶ 

  • Lift out the motherboard assembly using the plastic opening tool, prying at all four sides of the device.

  • Try to remove from left to right, using caution with the audio jack on the right side of the device.

Étape 2  ¶ 

Locate the volume toggle on the main frame of the phone.

Étape 2  ¶ 

  • Locate the volume toggle on the main frame of the phone.

  • Using the spudger, push the toggle in from the outside and remove.

Étape 3  ¶ 

Place the new toggle in, using the pointed end of the spudger to attach the toggle to the upper and lower pins.

Étape 3  ¶ 

  • Place the new toggle in, using the pointed end of the spudger to attach the toggle to the upper and lower pins.

  • Make sure the toggle is completely in place by pressing it outward into the frame.