Aller au contenu principal
Aide

Nexus One Motherboards Replacement

Un membre a contribué à ce tutoriel

Un membre a contribué à ce tutoriel

Un membre de notre communauté tout à fait remarquable a réalisé ce tutoriel. Il n'a pas été dirigé par l'équipe iFixit.

This guide is for installing the upper and lower motherboards on the Nexus One.

  • Auteur: Niklas Johnson
  • Durée estimée : 45 minutes - 1 heure
  • Difficulté: Modérée
Sections

Étape 1 Motherboards  ¶ 

Insert the spudger under the connector. Push the spudger up and twist to release the connector.

Étape 1 Motherboards  ¶ 

  • Insert the spudger under the connector.

  • Push the spudger up and twist to release the connector.

  • Repeat for the next connector.

Étape 2  ¶ 

Push on the USB port to expose the black connector. Use the spudger to pry the connector upwards. Use the spudger to pry the connector upwards.

Étape 2  ¶ 

  • Push on the USB port to expose the black connector.

  • Use the spudger to pry the connector upwards.

Étape 3  ¶ 

Place the spugder under the antenna connector. Pry connector up vertically.

Étape 3  ¶ 

  • Place the spugder under the antenna connector.

  • Pry connector up vertically.

Étape 4  ¶ 

Insert the spudger into tab above the camera. Slide upwards until the board detaches from the case. Slide upwards until the board detaches from the case.

Étape 4  ¶ 

  • Insert the spudger into tab above the camera.

  • Slide upwards until the board detaches from the case.

Étape 5  ¶ 

Press the pointed tip of the spudger into the space below the button assembly.

Étape 5  ¶ 

  • Press the pointed tip of the spudger into the space below the button assembly.

  • Wiggle the spudger tip towards the outside of the button.

  • The button assembly is under some tension and may fly off.

Étape 6  ¶ 

Push the pointed tip of the spudger into the base of the side button board.

Étape 6  ¶ 

  • Push the pointed tip of the spudger into the base of the side button board.

  • Lift up, the board will disconnect from the case.

Étape 7  ¶ 

Push on the lower motherboard until it slides under the case support. The motherboard assembly comes out as a single piece. Save the small black rubber rectangular sound guide under the motherboard, to replace over the microphone.

Étape 7  ¶ 

  • Push on the lower motherboard until it slides under the case support.

  • The motherboard assembly comes out as a single piece.

  • Save the small black rubber rectangular sound guide under the motherboard, to replace over the microphone.