Aller au contenu principal
Aide

Motorola Droid RAZR Motherboard Assembly Replacement

Conditions préalables uniquement

Conditions préalables uniquement

Notez qu'il ne s'agit que de conditions préalables pour d'autres tutoriels.

Droid RAZR motherboard assembly prerequisite.

This guide is a prerequisite for the display assembly and the individual components on the motherboard.

Sections

Étape 1 Motherboard Assembly  ¶ 

Remove the three 2.5 mm T3 Torx screws securing the metal chassis to the motherboard. Remove the metal chassis from the motherboard assembly.

Étape 1 Motherboard Assembly  ¶ 

  • Remove the three 2.5 mm T3 Torx screws securing the metal chassis to the motherboard.

  • Remove the metal chassis from the motherboard assembly.

Étape 2  ¶ 

Use the flat end of a spudger to remove the two red silicone microphone covers at the top and bottom of the motherboard. Use the flat end of a spudger to remove the two red silicone microphone covers at the top and bottom of the motherboard.

Étape 2  ¶ 

  • Use the flat end of a spudger to remove the two red silicone microphone covers at the top and bottom of the motherboard.

Étape 3  ¶ 

There is a small metal shield that covers the display assembly cable connectors on the motherboard. This shield is held in place by a few small clips that attach to the surrounding EMI shields.

Étape 3  ¶ 

  • There is a small metal shield that covers the display assembly cable connectors on the motherboard. This shield is held in place by a few small clips that attach to the surrounding EMI shields.

  • Use the tip of a spudger to gently bend the clips out of shape and remove the shield.

Étape 4  ¶ 

Use the flat end of a spudger to pry the three display cable connectors off their sockets on the motherboard. Use the flat end of a spudger to pry the three display cable connectors off their sockets on the motherboard. Use the flat end of a spudger to pry the three display cable connectors off their sockets on the motherboard.

Étape 4  ¶ 

  • Use the flat end of a spudger to pry the three display cable connectors off their sockets on the motherboard.

Étape 5  ¶ 

There are a number of small black plastic clips on the display assembly that hold the motherboard in place. Release the securing clips with a plastic opening tool.

Étape 5  ¶ 

  • There are a number of small black plastic clips on the display assembly that hold the motherboard in place.

  • Release the securing clips with a plastic opening tool.

Étape 6  ¶ 

Use a heat gun or hair dryer to soften the adhesive strip around the perimeter of the motherboard. Pry the edges of the motherboard up from the display assembly with a plastic opening tool. Remove the motherboard assembly.

Étape 6  ¶ 

  • Use a heat gun or hair dryer to soften the adhesive strip around the perimeter of the motherboard.

  • Pry the edges of the motherboard up from the display assembly with a plastic opening tool.

  • Remove the motherboard assembly.