Aller au contenu principal
Aide

Fujifilm FinePix Z5 LCD Screen Replacement

This guide provides clear images and step-by-step instructions to disassemble the camera in order to replace the LCD screen.

The LCD screen will often go black and remain non-responsive. This guide will take you through the steps of replacing the broken screen and installing a new one.

Étape 1 LCD Screen  ¶ 

Remove the two screws on the right side of the camera and the two screws on the left side. Use a small #00 Phillips flat head screwdriver. Keep all the screws in a container and the two different types separate.

Étape 1 LCD Screen  ¶ 

  • Remove the two screws on the right side of the camera and the two screws on the left side.

  • Use a small #00 Phillips flat head screwdriver.

  • Keep all the screws in a container and the two different types separate.

Étape 2  ¶ 

Remove the three screws from the bottom of the camera. You need a three-prong screw driver for two of the three screws; keep these screws separate.

Étape 2  ¶ 

  • Remove the three screws from the bottom of the camera.

  • You need a three-prong screw driver for two of the three screws; keep these screws separate.

Étape 3  ¶ 

Remove the back by carefully flipping it open to the right side. There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this. There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this.

Étape 3  ¶ 

  • Remove the back by carefully flipping it open to the right side.

  • There will be a ribbon cable attaching the front panel to the motherboard, be sure not to tear this.

Étape 4  ¶ 

Pull the LCD screen to the left slightly, lift it and flip it open to the right. There is also a ribbon cable attaching the LCD screen to the motherboard, be careful not to tear it.

Étape 4  ¶ 

  • Pull the LCD screen to the left slightly, lift it and flip it open to the right.

  • There is also a ribbon cable attaching the LCD screen to the motherboard, be careful not to tear it.

Étape 5  ¶ 

Using a small flat head screw driver, flip open the black lever to release the ribbon cable. Gently slide the cable out of the lock; the LCD screen is now free to be removed.

Étape 5  ¶ 

  • Using a small flat head screw driver, flip open the black lever to release the ribbon cable.

  • Gently slide the cable out of the lock; the LCD screen is now free to be removed.

Étape 6  ¶ 

Using your index finger, guide the cable of the new screen into place. Lock it in by pushing the black lever back down.

Étape 6  ¶ 

  • Using your index finger, guide the cable of the new screen into place. Lock it in by pushing the black lever back down.