Aller au contenu principal
Aide

LG VX5500 Mother Board Replacement

Includes procedure for replacing the mother board within the LG VX5500 phone.

  • Auteur: Henry
  • Durée estimée : 20 minutes
  • Difficulté: Modérée

This guide gives step-by-step instructions on how to remove the mother board in the LG VX5500 cell phone. To complete the task you will need a #00 Phillip's head screwdriver, tweezers, and a plastic opening tool.

Étape 1 Mother Board  ¶ 

Remove the (2) rubber screw covers located near the hinge of the phone using tweezers or a thumb tack. Unscrew the (4) 3.6mm screws using a #00 Phillip's head screw driver.

Étape 1 Mother Board  ¶ 

  • Remove the (2) rubber screw covers located near the hinge of the phone using tweezers or a thumb tack.

  • Unscrew the (4) 3.6mm screws using a #00 Phillip's head screw driver.

Étape 2  ¶ 

Carefully pry off the phone's backing using a plastic opening tool. Slip the tool into the crack between the keypad (front panel) and the back panel. Slide the tool along the sides of the phone to detach the tabs holding the backing on.

Étape 2  ¶ 

  • Carefully pry off the phone's backing using a plastic opening tool.

  • Slip the tool into the crack between the keypad (front panel) and the back panel.

  • Slide the tool along the sides of the phone to detach the tabs holding the backing on.

Étape 3  ¶ 

Peel back the sticker with tweezers and hold it back with your finger. Use the tweezers to lift the display adapter off the logic board.

Étape 3  ¶ 

  • Peel back the sticker with tweezers and hold it back with your finger.

  • Use the tweezers to lift the display adapter off the logic board.

Étape 4  ¶ 

Lift the mother board out of the phone casing. The keyboard can be easily removed once the mother board is out of the phone.

Étape 4  ¶ 

  • Lift the mother board out of the phone casing.

  • The keyboard can be easily removed once the mother board is out of the phone.