Aller au contenu principal
Aide

Samsung Rogue Front Function Keys Replacement

Replace worn or broken front function keys.

This guide will provide a step-by-step procedure for replacing the front function keys on your Samsung Rogue.

Sections

Étape 1 Front Function Keys  ¶ 

Remove the eight 1.7mm Philips screws above the keyboard.

Étape 1 Front Function Keys  ¶ 

  • Remove the eight 1.7mm Philips screws above the keyboard.

Étape 2  ¶ 

Carefully remove keyboard frame from the sliding mechanisms underneath.

Étape 2  ¶ 

  • Carefully remove keyboard frame from the sliding mechanisms underneath.

Étape 3  ¶ 

Remove the five 3.0mm Philips screws around the outside of the sliding mechanisms.

Étape 3  ¶ 

  • Remove the five 3.0mm Philips screws around the outside of the sliding mechanisms.

Étape 4  ¶ 

Use a plastic opening tool to pry off the upper slide plate. Be careful of the film of wires when taking off the upper slide plate. Be careful of the film of wires when taking off the upper slide plate.

Étape 4  ¶ 

  • Use a plastic opening tool to pry off the upper slide plate.

  • Be careful of the film of wires when taking off the upper slide plate.

Étape 5  ¶ 

Use tweezers to open the two black gates by putting them in the "up" position. With the same tweezers, carefully pull out the orange strips from the two specified gates. With the same tweezers, carefully pull out the orange strips from the two specified gates.

Étape 5  ¶ 

  • Use tweezers to open the two black gates by putting them in the "up" position.

  • With the same tweezers, carefully pull out the orange strips from the two specified gates.

Étape 6  ¶ 

Using tweezers, gently remove the bottom orange strip from the device. At this point you can easily lift out the rubber function key pad as well. At this point you can easily lift out the rubber function key pad as well.

Étape 6  ¶ 

  • Using tweezers, gently remove the bottom orange strip from the device.

  • At this point you can easily lift out the rubber function key pad as well.

Étape 7  ¶ 

There are two ways you can take out the front function keys: 1) Use a plastic phone opening tool to pry out the piece from the front of the phone. 2) Simply pop out the piece from the inside by pushing on its tabs.

Étape 7  ¶ 

  • There are two ways you can take out the front function keys:

  • 1) Use a plastic phone opening tool to pry out the piece from the front of the phone.

  • 2) Simply pop out the piece from the inside by pushing on its tabs.