Aller au contenu principal

Introduction

Replacing the bezel covering the Lcd

Pièces

Aucune pièce spécifiée.

  1. Use a coin to unscrew the battery cover, and remove battery.
    • Use a coin to unscrew the battery cover, and remove battery.

  2. Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover. Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover.
    • Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Open the screen, and remove the two t8 Torx screws holding the bezel in place.
    • Open the screen, and remove the two t8 Torx screws holding the bezel in place.

  5. Use a flat tip screw driver to unsnap the bezel from its place. When at the top rubberized area, pry the bezel down.
    • Use a flat tip screw driver to unsnap the bezel from its place.

    • When at the top rubberized area, pry the bezel down.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

aidan

Membre depuis le 26/02/2016

101 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 9

Total : 1,582