Réparez vos affaires Communauté Boutique

iHome IH11 AC Power Adapter Replacement

Introduction

Use this guide to remove the AC power adapter. For help troubleshooting click the link to our troubleshooting page iHome IH11 Troubleshooting.

Ce dont vous avez besoin

  1. iHome IH11 AC Power Adapter Replacement, Outer Case: étape 1, image 1 de 1

    • Unscrew the two 9.0 mm screws with the Phillips #1.

    • Remove the translucent bottom plastic piece.

    Traduire

  2. iHome IH11 AC Power Adapter Replacement: étape 2, image 1 de 2 iHome IH11 AC Power Adapter Replacement: étape 2, image 2 de 2

    • Remove the two 9.0mm screws on the back of the iHome with the Phillips #1 screwdriver.

    • Repeat the previous step for the two 9.0mm screws on the bottom.

    • Carefully slide the back cover off. There are wires attached to the back cover.

    Traduire

  4. iHome IH11 AC Power Adapter Replacement: étape 3, image 1 de 1

    • Remove the aluminum bracket by loosening the two nuts and removing the 8.0mm bolts with your hand.

    Traduire

  5. iHome IH11 AC Power Adapter Replacement, Motherboard: étape 4, image 1 de 2 iHome IH11 AC Power Adapter Replacement, Motherboard: étape 4, image 2 de 2

    • Remove the two 12.0mm screws that hold the motherboard with the Phillips #1 screwdriver.

    • Slide the motherboard gently out.

    Traduire

  6. iHome IH11 AC Power Adapter Replacement: étape 5, image 1 de 1

    • Remove the two 9.0 mm screws with the Phillips #1 screwdriver, then slide the circuit board for the AC adapter out.

    • Repeat the previous step by removing the two 9.0mm screws with the Phillips #1 screwdriver for the circuit board for the on/off switch.

    Traduire

  7. iHome IH11 AC Power Adapter Replacement: étape 6, image 1 de 2 iHome IH11 AC Power Adapter Replacement: étape 6, image 2 de 2

    • Unsolder the main connections holding the AC adapter to the circuit board.

    • Solder new adapter in same position with same connections.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

Nick Knowles

Membre depuis le 04/19/13

21 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 14-9, Maness Spring 2013 Membre de l'équipe Cal Poly, Team 14-9, Maness Spring 2013

CPSU-MANESS-S13S14G9

5 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 745