Réparez vos affaires Communauté Boutique

iHome IH11 Dock Connector Replacement

Introduction

Replace the dock connector on your iHome iP11, so you can play music and charge your battery once again. For help troubleshooting click the link to our troubleshooting page iHome IH11 Troubleshooting.

Ce dont vous avez besoin

  1. iHome IH11 Dock Connector Replacement, Dock Connector: étape 1, image 1 de 1

    • Remove the two 9mm screws that hold on the dock connector with a Phillips #1 Screwdriver.

    Modifier

  3. iHome IH11 Dock Connector Replacement: étape 2, image 1 de 2 iHome IH11 Dock Connector Replacement: étape 2, image 2 de 2

    • Pop the dock connector out of the iHome and gently pull the white plastic plug connected to the dock connector apart.

    • Remove the four 7.0mm screws with a Phillips #1 screwdriver.

    Modifier

  4. iHome IH11 Dock Connector Replacement: étape 3, image 1 de 1

    • Remove both of the black plastic pieces. They should easily slide off of the two guide holes in the circuit board.

    • The dock connector should now be exposed. You can now simply put your new dock connector in the old one's place.

    Modifier

    Where can. I find the. Pin out. For this. Connector

    Roy H - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

Nick Knowles

Membre depuis le 04/19/13

21 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 14-9, Maness Spring 2013 Membre de l'équipe Cal Poly, Team 14-9, Maness Spring 2013

CPSU-MANESS-S13S14G9

5 membres

5 tutoriels rédigés

2 commentaires

Where can I buy a replacement dock connector?

A Ross - Réponse

Likewise, this guide isn't much good if it uses parts that are unavailable.

CJ Shumate - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 2

Total : 2,392