Aller au contenu principal

Introduction

This will show you how to install a new speaker into your iHome. For help troubleshooting click the link to our troubleshooting page iHome IH11 Troubleshooting.

Pièces

Aucune pièce spécifiée.

  1. Unscrew the two 9.0 mm screws with a Phillips #1 screwdriver.
    • Unscrew the two 9.0 mm screws with a Phillips #1 screwdriver.

    • Remove the translucent bottom case.

  2. Remove the two 9.0mm screws on the back of the iHome with a Phillips #1 screwdriver. Repeat the previous step for the two 9.0mm screws on the bottom.
    • Remove the two 9.0mm screws on the back of the iHome with a Phillips #1 screwdriver.

    • Repeat the previous step for the two 9.0mm screws on the bottom.

    • Carefully slide the back cover off. There are wires connected to the back cover.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Remove the two 12.0mm screws holding the speaker to the iHome with a Phillips #1 screwdriver.
    • Remove the two 12.0mm screws holding the speaker to the iHome with a Phillips #1 screwdriver.

  5. Remove the four 12.0mm screws on the face of the speaker with the Phillips #1 Screwdriver. Carefully lift speaker out of its casing.
    • Remove the four 12.0mm screws on the face of the speaker with the Phillips #1 Screwdriver.

    • Carefully lift speaker out of its casing.

  6. Unsolder the two wires that connect to the speaker.
    • Unsolder the two wires that connect to the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Courtney Steinberg

Membre depuis le 19/04/2013

32 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 14-9, Maness Spring 2013 Membre de l'équipe Cal Poly, Team 14-9, Maness Spring 2013

CPSU-MANESS-S13S14G9

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 285