Réparez vos affaires Communauté Boutique

iHome iAVS16 Power Board Replacement

Introduction

This guide shows how to open the bottom of the iHome iAVS16 to gain access to the board housing the AC power and USB jacks.

Since the iHome iAVS16 is a compact device, any following replacement guide will use this guide as well in order to access the rest of the device.

Ce dont vous avez besoin

  1. iHome iAVS16 Power Board Replacement, Power Board: étape 1, image 1 de 3 iHome iAVS16 Power Board Replacement, Power Board: étape 1, image 2 de 3 iHome iAVS16 Power Board Replacement, Power Board: étape 1, image 3 de 3

    • Remove the four 1.7 mm Phillips #0 screws located on the bottom of the device.

    • Lift up the bottom of the device.

    • Carefully lift the bottom of the device up as to not damage the ribbon cable connecting it.

    Modifier

  2. iHome iAVS16 Power Board Replacement: étape 2, image 1 de 3 iHome iAVS16 Power Board Replacement: étape 2, image 2 de 3 iHome iAVS16 Power Board Replacement: étape 2, image 3 de 3

    • Remove the two 1.7 mm Phillips #0 screws holding the white face place onto the inside of the device's bottom.

    • Using an iFixit opening tool on the side without the black adhesive, carefully lift up the white face plate.

    • Lifting too quickly could damage the ribbon cable still attached.

    Modifier

  4. iHome iAVS16 Power Board Replacement: étape 3, image 1 de 2 iHome iAVS16 Power Board Replacement: étape 3, image 2 de 2
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Using the tweezers, lift up on the black tab holding the ribbon cable down.

    • Carefully pull the ribbon cable back and out of the slot.

    Modifier

  5. iHome iAVS16 Power Board Replacement: étape 4, image 1 de 3 iHome iAVS16 Power Board Replacement: étape 4, image 2 de 3 iHome iAVS16 Power Board Replacement: étape 4, image 3 de 3

    • Remove the two 1.7 mm Phillips #0 screws holding the power board in.

    • Carefully flip the board over.

    • Remove the red connector from its socket with a pair of tweezers.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Ashley Famularo

Membre depuis le 10/25/19

181 Réputation

2 tutoriels rédigés

Badges: 4

+ 1 badge de plus

Équipe

UMass Dartmouth, Team S1-G7, O'Connell Fall 2019 Membre de l'équipe UMass Dartmouth, Team S1-G7, O'Connell Fall 2019

UMASSD-O'CONNELL-F19S1G7

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 1

Total : 108