iHome iBT230 Keyboard (Buttons) Replacement

Introduction

This guide provides step-by-step instructions for replacing the keyboard (buttons) of the iHome iBT230. The buttons allows for the overall control of this device, such as a play/pause/pair button, powering it off, changing the mode, a preset button for the radio, a sleep/clock adjust button, two buttons for setting alarms, answering and ending phone calls, a snooze button, and finally a snooze/dimmer button. By replacing the keyboard plate, it will fix any broken or non-responsive buttons.

Ce dont vous avez besoin

Étape 1 Keyboard (Buttons)

iHome iBT230 Keyboard (Buttons) Replacement, Keyboard (Buttons): étape 1, image 1 de 1

Remove the four 5.5 mm Phillips Head #00 screws from the bottom palate of the iBT230.

Modifier

Étape 2

Grip the top of the iBT230 by placing your thumb on the back portion, where the USB port is located. Pull up, and you should notice various different colored wires, connected to the Main Motherboard.

Modifier

Étape 3

Unplug the connectors from all sides of the iBT230, and unplug the wire connected to the screen.
Make sure to note which wire goes where, you don't want to re-solder the wires into the incorrect ports!

Modifier

Étape 4

Unscrew the four 5.5 mm Phillips #00 face panel screws from the front screen.

Modifier

Étape 5

Once the four 5.5 mm Phillips #00 screws come out, slide the screen out vertically.
Disconnect the blue tipped ribbon from the back of the screen.

Modifier

Étape 6

Once the screen is removed, unscrew the six 4.0 mm Phillips #02 screws located on top of the keyboard.
As shown in the image, the keyboard is represented by a brown colored palate.

Modifier