Réparez vos affaires Communauté Boutique

iHome iBT84 Light Fixture Replacement

Introduction

This guide will help the user replace the individual light fixtures inside this device. You will need a screwdriver and a metal spudge.

Ce dont vous avez besoin

  1. iHome iBT84 Light Fixture Replacement, Motherboard: étape 1, image 1 de 2 iHome iBT84 Light Fixture Replacement, Motherboard: étape 1, image 2 de 2

    • On the opposite side of the speaker should be a sticker, remove it with your fingers or the flat plastic iFIxit tool.

    • Use a Philip's screwdriver to take the screws out of the cover.

    Modifier

  2. iHome iBT84 Light Fixture Replacement: étape 2, image 1 de 2 iHome iBT84 Light Fixture Replacement: étape 2, image 2 de 2

    • Once the screws are all out, the cover should come off revealing the motherboard.

    Modifier

  3. iHome iBT84 Light Fixture Replacement: étape 3, image 1 de 3 iHome iBT84 Light Fixture Replacement: étape 3, image 2 de 3 iHome iBT84 Light Fixture Replacement: étape 3, image 3 de 3

    • You will notice that the triangular black volume piece is loose, make sure to take that off revealing the buttons.

    • Once that is done, the motherboard can be taken out. May require some wiggling.

    • Make sure none of the wires are damaged and that they are all connected.

    Modifier

  5. iHome iBT84 Light Fixture Replacement: étape 4, image 1 de 1

    • The connections shown here can be taken off by pulling on the white plastic connector piece.

    • The same can be said about the white, paper like, connectors. Pull on them gently.

    • Once all connections are apart, the motherboard is safe to be replaced.

    Modifier

  6. iHome iBT84 Light Fixture Replacement, Light Fixture: étape 5, image 1 de 1

    • Use the screwdriver to unscrew the screws on the left and right sides.

    Modifier

  7. iHome iBT84 Light Fixture Replacement: étape 6, image 1 de 1

    • Once unscrewed, use the metal spudge to lift the base of the light fixture.

    Modifier

  8. iHome iBT84 Light Fixture Replacement: étape 7, image 1 de 2 iHome iBT84 Light Fixture Replacement: étape 7, image 2 de 2

    • Lift the base of the light fixture out with the lights.

    • Be careful. The light fixture's can be easily bent.

    Modifier

  9. iHome iBT84 Light Fixture Replacement: étape 8, image 1 de 2 iHome iBT84 Light Fixture Replacement: étape 8, image 2 de 2

    • Pull gently on the individual light fixture that needs to be replaced.

    • Place new individual LED light strip.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Joshua Lopez

Membre depuis le 09/25/17

101 Réputation

1 tutoriel rédigé

Badges: 3

Équipe

University of North Texas, Team S1-G3, Thompson Fall 2017 Membre de l'équipe University of North Texas, Team S1-G3, Thompson Fall 2017

UNT-THOMPSON-F17S1G3

4 membres

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 9

Total : 590