Réparez vos affaires Communauté Boutique

iHome iP1 Back Cover Replacement

Introduction

Use this guide to remove your iHome iP1's back cover. This cover is located on the underside of the platorm connecting the speakers. Although it serves no function other than to protect the motherboard, it is necessary to remove in order to remove many other components of the iHome iP1, such as the speakers and the 30-pin connector.

Ce dont vous avez besoin

  1. iHome iP1 Back Cover Replacement, Back Cover: étape 1, image 1 de 1

    • Orient the iHome upside down with the speakers facing away from you.

    Traduire

  3. iHome iP1 Back Cover Replacement: étape 2, image 1 de 2 iHome iP1 Back Cover Replacement: étape 2, image 2 de 2

    • Remove the four 9.5 mm Phillips #2 screws located on each of the four corners of the iHome's back cover.

    Traduire

  4. iHome iP1 Back Cover Replacement: étape 3, image 1 de 1

    • Remove the back cover by grabbing its sides and lifting it off the iHome.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Wen Sullivan

Membre depuis le 10/06/16

518 Réputation

4 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team 20-1, Livingston Fall 2016 Membre de l'équipe Cal Poly, Team 20-1, Livingston Fall 2016

CPSU-LIVINGSTON-F16S20G1

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 7

Total : 215