Réparez vos affaires Communauté Boutique

iLive IKBC384S FM/AM Antenna Replacement

Introduction

This is a guide to help replace the FM/AM antenna for the iLive IKBC384S.

Ce dont vous avez besoin

  1. iLive IKBC384S FM/AM Antenna Replacement, Top Cover: étape 1, image 1 de 2 iLive IKBC384S FM/AM Antenna Replacement, Top Cover: étape 1, image 2 de 2

    • Make sure you remove all seven 3 mm screws before proceeding to the next step.

    Modifier

  2. iLive IKBC384S FM/AM Antenna Replacement: étape 2, image 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: étape 2, image 2 de 2

    • Use iOpener or heat gun on all sides except the front.

    Modifier

  3. iLive IKBC384S FM/AM Antenna Replacement: étape 3, image 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: étape 3, image 2 de 2

    • Be cautious when taking the top of the device off there may still be some adhesive stuck to device.

    • The top of the device will be very difficult to remove because of the adhesive holding it together.

    Modifier

  5. iLive IKBC384S FM/AM Antenna Replacement, FM/AM Antenna: étape 4, image 1 de 2 iLive IKBC384S FM/AM Antenna Replacement, FM/AM Antenna: étape 4, image 2 de 2

    • Remove all four screws(13.5 mm in length) that are securing the disk drive.

    Modifier

  6. iLive IKBC384S FM/AM Antenna Replacement: étape 5, image 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: étape 5, image 2 de 2

    • Unplug the ribbon cable connected to the motherboard that stems from the disc drive.

    • Also, disconnect the two power connectors from the motherboard.

    • Once you have removed the ribbon cables and two connectors on the motherboard the disk drive can be removed.

    Modifier

  7. iLive IKBC384S FM/AM Antenna Replacement: étape 6, image 1 de 1

    • After removing the top of the device, locate the screws on the motherboard. Gently unscrew all four of the 3.5mm screws on the motherboard.

    Modifier

  8. iLive IKBC384S FM/AM Antenna Replacement: étape 7, image 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: étape 7, image 2 de 2

    • Desolder the antenna at the contact point.

    • Check out this awesome guide for soldering and desoldering tips.

    Modifier

  9. iLive IKBC384S FM/AM Antenna Replacement: étape 8, image 1 de 2 iLive IKBC384S FM/AM Antenna Replacement: étape 8, image 2 de 2

    • Place iOpener on antenna for approximately 5 minutes

    Modifier

  10. iLive IKBC384S FM/AM Antenna Replacement: étape 9, image 1 de 1

    • Lift up and remove all of the antenna.

    • The antenna will be glued down all the way around the radio

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Tracy Walts

Membre depuis le 03/21/17

201 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Texas Tech, Team S46-G6, Bennett Spring 2017 Membre de l'équipe Texas Tech, Team S46-G6, Bennett Spring 2017

TTU-BENNETT-S17S46G6

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 678