Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Ce dont vous avez besoin
-
-
Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.
-
-
-
-
Remove the 2 torx 10mm screws on the EMI shield
-
Carefully remove shield and copper tape
-
-
-
Peel back the white paper, revealing the screws that connect the hard drive to the carrier.
-
Remove the 4 T-10 5mm screws connecting the hard drive and frame. (There are 2 screws on each side)
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
26 autres ont terminé cette réparation.