Introduction
Keep your iMac cool and happy by replacing the upper right fan.
Ce dont vous avez besoin
-
-
Lay the iMac display-side down on a flat surface.
-
Loosen the three Phillips screws securing the rear panel to the iMac.
-
-
-
Remove the two Phillips screws securing the fan cover to the midplane.
-
Lift the fan cover up off midplane.
-
-
-
-
Disconnect the hard drive data cable connector from the logic board by pulling its connector straight up.
-
-
-
Disconnect the upper right fan cable connector from the logic board by pulling its connector straight up.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.