Introduction
Upgrade your hard drive for more storage capacity.
Ce dont vous avez besoin
-
-
Lay the iMac display-side down on a flat surface.
-
Loosen the three Phillips screws securing the rear panel to the iMac.
-
-
-
Remove the following three screws:
-
One shouldered 12.4 mm Phillips.
-
Two 7 mm T10 Torx.
-
-
-
-
Remove the two 15 mm shouldered T10 Torx screws from the hard drive and remove the bracket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
149 autres ont terminé cette réparation.