Aller au contenu principal

iMac Intel 21.5" EMC 2308 CPU Fan Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. iMac Intel 21.5" EMC 2308 CPU Fan Replacement, CPU Fan: étape 1, image 1 de 1
    • If present, remove the pieces of clear tape securing the ambient temperature sensor cable and the left speaker cable to the rear case.

  2. iMac Intel 21.5" EMC 2308 CPU Fan Replacement: étape 2, image 1 de 1
    • Remove the two 13 mm T10 Torx screws securing the CPU fan to the outer case.

  3. iMac Intel 21.5" EMC 2308 CPU Fan Replacement: étape 3, image 1 de 1
    • Peel the cable retainer off the side of the CPU fan.

    • If the tape on the cable retainer loses adhesion, remove the existing foam tape and either use double-sided tape or glue to reattach it to the CPU fan.

    • Remove the CPU fan from the outer case, minding any cables that may get caught.

  4. iMac Intel 21.5" EMC 2308 CPU Fan Replacement: étape 4, image 1 de 1
    • De-route the left speaker cable from the clips securing it to the outer case.

  5. iMac Intel 21.5" EMC 2308 CPU Fan Replacement: étape 5, image 1 de 2 iMac Intel 21.5" EMC 2308 CPU Fan Replacement: étape 5, image 2 de 2
    • Carefully remove the left speaker and ambient temperature sensor cables from the CPU fan cable retainer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,752