Introduction

Use this guide to remove your access door.

Pièces

Aucune pièce nécessaire.

  1. Unplug your iMac's AC cord along with any peripheral devices.
    • Unplug your iMac's AC cord along with any peripheral devices.

    • Lay your iMac face-down on a soft, clean surface as shown.

    • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • All three screws will remain captive in the access door.

    • Remove the access door.

    Before beginning unplug your iMac.

    Henry Barnett - Réponse

    The screws are not phillips #1 as implied above. My phillips#2 bit fit.

    John McWilliams - Réponse

    Yes phillips #2 is the correct Bit

    Heath - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 23

Total : 4,104