Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the strip of tape securing the GPU thermal sensor cable to the logic board.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the following three screws:
-
One 4.2 mm T10 Torx screw
-
Two 5 mm T8 Torx screws
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Grab the GPU thermal sensor cable connector and pull it straight up and out of its socket on the logic board.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the GPU heat sink slightly and pull the GPU board out of its socket on the logic board.
-