Aller au contenu principal

iMac Intel 21.5" EMC 2428 Optical Drive Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. iMac Intel 21.5" EMC 2428 Optical Drive Replacement, Optical Drive: étape 1, image 1 de 1
    • From here, the repair will be easier if you flip the computer around so the base is facing you.

    • Remove the following four screws:

    • One 9.3 mm T10 Torx screw with a large head

    • Three 9.3 mm T10 Torx screws with a normal sized head

  2. iMac Intel 21.5" EMC 2428 Optical Drive Replacement: étape 2, image 1 de 2 iMac Intel 21.5" EMC 2428 Optical Drive Replacement: étape 2, image 2 de 2
    • Pull the optical drive thermal sensor connector straight up from its socket on the logic board. Pull parallel to the board.

  3. iMac Intel 21.5" EMC 2428 Optical Drive Replacement: étape 3, image 1 de 2 iMac Intel 21.5" EMC 2428 Optical Drive Replacement: étape 3, image 2 de 2
    • Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.

    • Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.

    • Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink.

  4. iMac Intel 21.5" EMC 2428 Optical Drive Replacement: étape 4, image 1 de 1
    • Disconnect the optical drive cable by pulling its connector away from the optical drive.

    • Remove the optical drive from the iMac.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 296