Introduction
Use this guide to replace the iSight camera.
Ce dont vous avez besoin
-
Outil utilisé dans cette étape :iMac Intel 21.5" Cardboard Service Wedge$4.99
-
Outil utilisé dans cette étape :Plastic Cards$2.99
-
Starting from the top right corner of the iMac, wedge a plastic card between the display and frame.
-
-
-
-
Use the tip of a spudger to flip down the metal retaining bracket on the camera cable.
-
-
-
Remove the two 4.3 mm T5 Torx screws securing the camera board to the top of the rear enclosure.
-
To reassemble your device, follow these instructions in reverse and use our Adhesive Strips Guide to reattach the display glass.
To reassemble your device, follow these instructions in reverse and use our Adhesive Strips Guide to reattach the display glass.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.