Aller au contenu principal

Introduction

Remove the access door to replace RAM modules.

Pièces

Aucune pièce spécifiée.

  1. Loosen the three Phillips screws securing the access door to the bottom edge of your iMac. These screws will remain captive in the access door.
    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • These screws will remain captive in the access door.

    • Remove the access door from your iMac.

    • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

Conclusion

To reassemble your device, follow these instructions in reverse order.

30 autres ont terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 5

30 derniers jours : 12

Total : 45,978